How To Install Wireless Router At Home

Download Article

Getting your new wireless router prepare doesn't need to be complicated. This wikiHow volition walk you through the process stride-by-footstep—connecting the hardware, configuring your router, and getting your devices connected and ready to get—and then you can savor your new wireless internet (without any headaches).

i
Buy a wireless router. Routers come up in all shapes and sizes. Compare features to notice the router that is right for yous. If you have more area that you need to embrace, or take lots of walls in your habitation, you'll need a router that offers the option of upgrading antenna(s) with high proceeds types - if not supplied in the box. If more than one wireless device volition be connecting at the same time at different speeds, a MiMo type router is recommended, otherwise the speed for all devices will drib the highest supported by all at that fourth dimension.
- All modern routers should back up 802.11n, or Wireless-N). This is the nearly stable, offers the fastest speeds and is backwards compatible with older standards such as 802.11g.
2
Connect your router to your modem. ^[one] Routers and wireless routers enable you lot to share your broadband internet connection with multiple devices. To practice then, you lot will demand to connect your broadband modem to the router. For best results, place your router near your modem.
- Connect the router and the modem with an Ethernet cable. About routers come packaged with a brusque Ethernet cable that you can use for this.
- Connect the modem to the WAN / Internet Port on your router. It is usually showtime, and may exist a different color from the LAN Ports. WAN stands for "Wide Area Network" which is what the internet actually is. LAN stands for "Local Area Network". The router will assign a local or "private" IP address to any device connected to its LAN Ports or WiFi signal from a pool of private addresses (listed further beneath).
Advertisement
3

Connect any devices y'all want to hard wire with Cat v (or meliorate) Ethernet cables. If you have computers that are close, or a video game panel or TV, you tin can connect them to the router via Ethernet.^[2] This will result in a more stable and faster connectedness, and doesn't crave whatsoever extra configuration.
four

Connect at to the lowest degree one computer via Ethernet. Yous will demand at least one computer connecting via Ethernet cable in order to arrange your router settings. You can disconnect this reckoner afterward if you want to connect wirelessly. You can too connect your laptop wirelessly for the start time, the wifi network proper name and the default password will be printed on the router'southward label

Advertisement

1
When you ability on the router, it volition only create its wi-fi network, and the device will be continued to the router'due south wi-fi connection, not the cyberspace. To connect the router to the internet, with some net providers (i.e. GTPL in Republic of india), information technology is required to register router's MAC address to the internet service provider's website.
- MAC of the router can exist constitute printed on router or in the documents etc.
2

Go to the cyberspace service provider'south website. Log in with the username and password provided past the internet access provider and go to MAC accost update option. one can see their existing laptop / computers MAC address there. Add the router's MAC address there and relieve information technology. This process means that the router is authorized to employ the internet provide by the broadband visitor.

Advertisement

1
Find the IP address of the router . If this is a new installation or new router, determine the default IP address that may be printed on a characterization affixed to the router or in the documentation.^[three] If you can't detect the router's IP address anywhere, yous can practice a spider web search for the router model to run across what the default address is.
- IP addresses are formatted as four groups of up to 3 digits, separated past periods.
- Commonly found "default" Local IP addresses for routers are 192.168.0.1, 192.168.1.1, 192.168.2.1, 10.0.0.1. Note that all the addresses in the follow ranges: 192.168.0.0 - 192.168.255.255, 172.16.0.0 - 172.31.255.255 & 10.0.0.0 - x.255.255.255 have been ready aside for sectional utilize in a LAN; and one address in the range of any of them of them would be assigned to the connected router.
two
Open up a web browser on the computer that is connected to the router. Enter in the IP address of the router into the accost bar and press Enter. Your browser will attempt to connect to the router'southward configuration carte.
- If your router came with an installation disc, you lot can run the configuration program from that instead. Information technology will accomplish many of the same functions.
3
Enter your username and password. In order to admission the configuration page, you will need to be on the router'southward IP accost and enter a valid username and countersign at the prompt. Most routers have a basic business relationship gear up up that you will need to use to log on. This varies from model to model, but should exist printed on the router or in the documentation.
- The well-nigh typical username is "admin".
- The nearly typical passwords are "admin" and "countersign".
- Many routers volition only crave a username and a blank password, and some allow you to leave all fields bare.
- If you can't figure out the correct IP address, your username or password, search for your router model online to see what the default login is. If it has been changed, printing the Reset button on the back of the router for x (to 30+ seconds as dictated in the instructions for the router model) to restore factory defaults and endeavour again.
4

Open up the Wireless Settings. When y'all log in to your router, you will be taken to the router's chief bill of fare or status screen. In that location will be several options to choose from. The Internet section tin can usually be left at default settings, unless you received specific instructions from your internet service provider. The Wireless section will allow you to prepare your wireless network.
5
Enter a proper name for your wireless network. In the Wireless section, yous should see a field labeled SSID or Name. Enter a unique proper name for your wireless network. This is what other devices will see when scanning for networks.
- Cheque the box to enable SSID broadcast. This will essentially "turn on" the wireless network so that it may be readily seen past anyone in range of the bespeak. *Encounter the Tips department below for boosted information on the SSID setting.
half-dozen

Choose a security method. Choose from the list of available security options. For the best security, choose WPA2-PSK every bit the encryption method. This is the nearly hard security to crack, and will give you lot the most protection from hackers and intruders.
7

Create a passphrase. Once you've chosen your security method, enter in a passphrase for the network. This should be a difficult password, with a combination of messages, numbers, and symbols. Don't use any passwords that could be easily deduced from your network name or from knowing y'all.
viii

Salve your settings. Once y'all are finished naming and securing your wireless network, click the Utilize or Save push. The changes will be applied to your router, which may take a few moments. One time the router has finished resetting, your wireless network will exist enabled.
9

Change your router's username and countersign from the default. Once you lot have your network configured, you should alter the username and password that you use to admission your router. This will help protect your router from unauthorized changes. You tin change these from the Administration section of the router configuration menu.^[iv]
10
Cake sites. If you desire to prevent devices that are connected to your network from accessing certain websites, you can utilise built-in blocking tools to restrict access. These tin can be found in the Security/Block section of the router.
- You can usually block past specific domain names, or by keywords.
Advertisement

1

Connect a computer, tablet, or smartphone to the wireless network. Browse for the wireless network with the SSID you provided in a higher place. On any device that supports wireless networks, you should run across your new network as long equally y'all are within range of the router. Select it and y'all will exist prompted for the passphrase.
ii
Enter your wireless passphrase. Once y'all enter the passphrase, your device volition be automatically connected to the wireless network. The network will be stored in your devices retention and will automatically connect whenever you lot are within range.
- For detailed instructions on selecting and joining a wireless network for your specific computer, tablet, or smartphone, follow this guide.
three

Advertisement

Add New Question

Question

I can't get internet access. What should I do?

Contact your internet provider for help.
Question

Tin I reset my admin's countersign if I forgot it?

Babawale Oladapo

Community Answer

For yous to reset your admin password, you will need to reset your router to its default mill settings
Question

Can y'all use Wi-Fi with a telephone?

You tin can utilise Wi-Fi with a smartphone (which is what near people accept these days), non with a basic prison cell telephone.
Question

Can I remove the Ethernet cable once the router is set up?

You tin can remove Ethernet cables from devices that are going to exist wireless (eastward.thou. a laptop), but you should leave the router wired to any modems. Don't forget to configure the router kickoff!
Question

How practise I connect Wifi to other devices?

Yous take to exercise it from the device itself. On settings in any device, there should be a Wifi symbol and wireless networks available.
Question

How long does information technology take to set up a router?

Less than an hour, depending with your modem speed. Information technology will also depend on how comfortable you lot are with setting it up, be sure to read the instructions closely.
Question

What can I do if I put in the correct username and password to connect to the router, but it doesn't work?

Babawale Oladapo

Customs Answer

The just thing you can do at that indicate is to restore your router to its default manufactory settings.
Question

I am out of LAN ports on my router and need one more. How can this be accomplished?

Add together a four-port (or higher count) network switch. Connect the new switch'south WAN or input port to one of the existing router'south LAN ports. You now have four new LAN ports; connect the original devices and you lot'll still take open up ports. Using a switch lets you add more than ports without needing configuration. Don't utilize a "hub" (as well slow) or a router (too complex). Make sure you use Cat5 cable for short jumps under 2m or Cat5e for runs nether 10m. Since 1Gb networks are common, exist sure you employ hardware that supports that speed.
Question

Should I leave my router switched on all the fourth dimension?

It'due south up to you, but most people practise leave their routers on all the time.
Question

How can I fix a TP-Link that restarts at random times?

Information technology'south possible that it's overheating. Endeavour to move information technology to a identify with more ventilation. If that does not work, then try a factory reset. If those suggestions fail, then your device is defective, and you lot volition have to buy a new ane.

Show more answers

Ask a Question

200 characters left

Include your email address to become a message when this question is answered.

Submit

If you have procured a used wireless router from a friend or store, make sure to reset it to manufacturing plant settings before installing it. Information technology may try to configure your wireless network according to the previous system. Detect the reset button on the router, and printing it for thirty seconds with a pin or pencil.

Advert

About This Article

Article Summary X

To set up a router in your domicile, connect the router to your wireless modem with an Ethernet cable, plug the router's power cablevision into a power source, and turn on the router if it doesn't commencement up already. Y'all can then connect your computer or smartphone to the router by selecting the router's name in the Wi-Fi menu and inbound the countersign establish on the back or bottom of the router.

Did this summary help y'all?

Thanks to all authors for creating a page that has been read 1,897,408 times.